CAUTION! It is recommended to clean the mixer attachments immediately after all dishes have been prepared. This will prevent
food residues from drying up and make cleaning the product easier.
If the drive housing is contaminated with processed food during operation, stop your work, clean the product, and only then
resume operation.
Use only mild kitchen cleaning agents to clean the product. It is not allowed to use abrasive cleaning agents, e.g. cleaning powder
or milk, or agents containing corrosive substances. Do not use any solvents, petrol, or alcohol to clean the product.
Dilute the cleaning agent with water, according to the instructions supplied with the agent. Then, apply it on a soft cloth and clean
the drive housing on the outside.
Remove any residues of the cleaning agent with a soft cloth slightly soaked in clean water. Then, dry all surfaces with a dry soft
cloth.
CAUTION! The drive housing is not designed for water jet cleaning. Do not immerse the drive housing in water.
You can clean containers with a graduated scale and the working end of the whipping attachment with a water jet or by immersing
in water, if it has been disconnected from the power adapter that facilitates connecting the drive. Other parts of the product should
only be cleaned with a damp cloth.
The blade and the blade cover of the mixing attachments can be cleaned with a jet of water, if the attachment has been discon-
nected from the drive. Take care to prevent the power adapter that facilitates connecting the drive from getting wet.
All the components must be thoroughly dried, before reusing the product.
None of the product components is intended for cleaning in a dishwasher or by high-pressure jet cleaning.
CAUTION! If you are preparing diff erent dishes one after another, using the same attachment, you can dispose of food residues,
by immersing the attachment in a container with clean, lukewarm water, and activating it for a short period of time.
Avoid contact with the human body, when cleaning the blades. Wash with brushes or sponges.
Transport and storage
Before commencing storage or transport of the product, clean it thoroughly from food residues.
If stored, keep the product indoors, and make sure it is not exposed to dust, dirt, or moisture. It is recommended to store the
product in its original packaging.
TECHNICAL DATA
Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Insulation class
Net weight
International Protection Rating
O R I G I N A L
12
GB
Unit of measure
[V~]
[Hz]
[W]
[kg]
I N S T R U C T I O N S
Value
67700
220-240
50 / 60
700
II
0.6
IPX0
Value
67701
220-240
50 / 60
700
II
0.6
IPX0