TRAPP Master 500L Manual De Instrucciones página 33

www.trapp.com.br
Press the spool against the ground as many
 
times as necessary.
In order not to damage the equipment or the
 
protection device, only press the central part
of the spool against the ground.
2. You may want to carry out this operation manually:
Unplug the equipment.
 
Press the central part of the spool (1) with
 
one hand and with the other pull the nylon
line (2) in the necessary length. If the wire
exceeds the ideal length, it will be cut by the
blade fixed to the protection device.
1
3
2
Fixing the extension cord to the
equipment
There is a locking system in the lower part of
the handle to facilitate usage and to prevent the
extension cord from being disconnected from the
wall outlet. To use this system, do as shown in
the next figure:
Put the extension cord in hole (1).
 
Pass the cord over the lock (2).
 
Connect the equipment plug to the extension
 
cord (3).
All manuals and user guides at all-guides.com
1
2
1
How to trim and cut the grass
Carefully check the area where the
 
equipment will be used.
Remove all stones, pieces of wood, wires,
 
bones, glass and other weird objects that
may cause an accident during the use of the
equipment.
For your safety, wear goggles, adequate
 
clothing and shoes.
1. Hold the lawn mower/trimmer in suspension
with one hand and with the other press the
trigger. For better performance, whenever
possible, move the lawn mower/trimmer from
right to left.
Trigger
2. Keep an adequate height in relation to the
ground.
3. If the grass is very high, cut it in turns to
avoid overloading the equipment.
Cuts in alignment are used to trim the grass
 
that grows over sidewalks and driveways. Tilt
the lawn mower/trimmer and cut above the
paved area.
33