TRAPP Master 500L Manual De Instrucciones página 31

www.trapp.com.br
Use and Operation Instructions
Warning!
All and every maintenance or cleaning shall be
done with the equipment turned off and
unplugged.
Installation of the protection device
Before switching on and using the lawn
 
mower/trimmer, install the protection device.
TRAPP lawn mowers/trimmers are already
 
assembled when delivered with the
exception of the protection device. It is
conditioned together with the equipment in
the same package. To assemble it, turn the
lawn mower/trimmer upwards (Fig. 1).
Place the protection device as per drawing,
 
and fit it in lock (3) (Fig. 2). Press it to the
body (4), put screws (2) in position and
tighten them (Fig. 1).
If you use the equipment without the
 
protection device, you will not be
entitled to the warranty.
1
Protection device
2
Screws
3
Lock
4
Body
Fig. 1
Fig. 2
All manuals and user guides at all-guides.com
Adjusment of adjustable handle
When in use, the equipment shall always
 
remain suspended, cutting the grass above
the ground. For your convenience, the height
of the adjustable handle can be adjusted in
the following way:
1. Loosen the wing nut that fixes the adjustable
handle to the bar;
2. Slide the adjustable handle upward or
downward to the desired height;
3. Tighten the wing nut.
Manípulo (4)
Adjustment of height (extendable
handle) Super 500/700/800/1000 and
Super 800 Plus/1000 Plus
TRAPP Super Line is equipped with a system
  that allows you to adjust the height of the
lawn mower/trimmer for more comfort during
usage. To adjust the height of the lawn mower/
trimmer, do as follows:
Disconnect female connector (1) from
O 
male connector (2), slide upper bar (3)
either upwards or downwards to adjust
height as appropriate.
1
Punho ajustável (3)
Ajustable
handle
Wring nut
Porca
plástica (1)
Bar
Cabo (2)
2 3
5
31