Scheppach DP55 Traducción Del Manual De Instrucciones Original página 24

d) Remove the setting tools or spanners before
switching on the electric tool. A tool or spanner
that is located in a rotating device part may result
in injuries.
e) Avoid abnormal posture. Make sure that you
have secure footing and always maintain your
balance. This will allow you to better control the
electric tool in unexpected situations.
f) Wear suitable clothing. Do not wear wide
clothing or jewellery. Keep hair, clothing and
gloves away from moving parts. Loose clothing,
jewellery and long hair can be caught by moving
parts.
g) If dust extraction and collection devices can
be mounted, make sure that they are connect-
ed and used properly. Using a dust extraction
unit can reduce hazards caused by dust.
h) Do not allow yourself to be lulled into a false
sense of security and do not ignore the safe-
ty rules for electric tools, even when you have
used them many times and have become fa-
miliar with them. Careless actions can result in
serious injuries within a fraction of a second.
Using and handling the electric tool
a) Do not overload the device. Use the electric tool
intended for your work. The suitable electric tool
allows you to work better and more safely in the
indicated power range.
b) Do not use an electric tool whose switch is
defective. An electric tool that cannot be
switched on or off is dangerous and must be
repaired.
c) Remove the plug from the socket and/or take
out a removable battery before setting the
device, changing insertion tool parts or put-
ting the electric tool away. These precautionary
measures will prevent the electric tool from start-
ing unintentionally.
d) Keep unused electric tools out of the reach of
children. Do not let people use the electric tool
who are not familiar with it or who have not read
these instructions. Electric tools are dangerous if
they are used by inexperienced people.
24 | GB
e) Maintain electric tools and tool attachments
with care. Check whether moving parts function
properly and do not get stuck and whether parts
are broken or are damaged and thus adversely af-
fect the electric tool function. Have damaged parts
repaired before using the electric tool. Many ac-
cidents are caused by poorly maintained electric
tools.
f) Always keep cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges seize up less often and are eas-
ier to guide.
g) Use electric tools, accessories, insertion tool,
etc. according to these instructions. Take the
working conditions and the activity to be carried
out into consideration. Using electric tools for ap-
plications other than the intended uses can lead to
dangerous situations.
h) Keep the handles and gripping surfaces dry,
clean and free of oil and grease. Slippery han-
dles and gripping surfaces prevent safe operation
and control of the electrical tool in unforeseen sit-
uations.
Service
a) Only have your electric tool repaired by qual-
ified specialists and only with original spare
parts. This ensures that safety of the electric tool
is maintained.
Safety instructions for drills
a) The drill must be secured. An incorrectly se-
cured drill can move or topple and this can result
in injuries.
b) The workpiece must be clamped or fastened
to the workpiece support. Do not drill into
workpieces that are too small to be securely
clamped. Holding the workpiece by hand can lead
to injuries.
c) Do not wear gloves. Gloves can be caught by
rotating parts or drilling debris and thus cause in-
juries.
d) Keep your hands away from the drilling area
whilst the electrical tool is running. Contact
with rotating parts or drilling debris can cause in-
juries.
www.scheppach.com