Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CONNECTING THE HOB TO THE MAINS POWER SUPPLY
The power supply should be connected in compliance with the relevant standard,or a single-pole circuit
breaker.the method of connection is shown below.
1.
If the cable is damaged or needs replacing, this should be done by an after-sales technician using
the proper tools, so as to avoid any accidents.
2.
If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must
be installed with a minimum gap of 3mm between the contacts.
3.
The installer must ensure that the correct electrical connection has been made and that it complies
with safety regulations.
4.
The cable must not be bent or compressed.
5.
The cable must be checked regularly and only replaced by a properly qualified person.
DISPOSAL: Do not
dispose this
product
as unsorted
municipal
waste. Collection of
such waste
separately
for special
treatment is
necessary.
This appliance is labeled in compliance with European directive 2002/96/EC for
Waste Electrical and Electronic Equipment (WEEE). By ensuring that this
appliance is disposed of correctly, you will help prevent any possible damage to
the environment and to human health, which might otherwise be caused if it were
disposed of in the
wrong way.
The symbol on the product indicates that it may not be treated as normal
household waste. It should be taken to a collection point for the recycling of
electrical and electronic goods.
This appliance requires specialist waste disposal. For further information
regarding the treatment, recover and recycling of this product please contact
your local council, your household waste disposal service, or the shop where you
purchased it.
For more detailed information about treatment, recovery and recycling of this
product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.
i
-48-
Tabla de contenido
