5. Slide the power switch OFF. Rinse the robot with fresh water after every use. DO NOT
use any detergent.
NOTE: To ensure the most efficient cleaning, when your pool is quite dirty, it is
recommended to empty the debris compartment after the first 30min of operation,
or whenever the robot's movement has slowed down noticeably. Then return the robot
(with an emptied debris compartment) to the pool, and let it run through the remaining of
its cycle.
EMPTYING THE DEBRIS COMPARTMENT
WARNING!
Using the robot without its filter cover in place will VOID your warranty.
In order to maximize the cleaning efficiency, clean the debris compartment and the filter
cover before and after each use.
CAUTION! Before cleaning the debris compartment, make sure the robot is OFF.
1. Place the cleaner on a flat surface. Pull one side clip outwards to lift one side of the
cover and repeat the steps on the other side to lift the entire top cover to expose the
filter cover and filter plate.
2. Detach the filter cover and remove the debris from the compartment. It is recommended
to clean the filter cover net with splashing water. If brushing is deemed necessary, use
only a soft brush to clean it carefully and gently to avoid damaging it.
3. After cleaning, make sure that the filter cover is in place and the body top cover is
correctly installed and secured by the side clips.
All manuals and user guides at all-guides.com
15