Tabla de contenido
Idiomas disponibles
Idiomas disponibles
an account and log in.
3. Enable WiFi (2.4GHz) and GPS Location on
your mobile phone.
4. To add the sensor to the application, tap on the
"+" icon in the upper right corner.
5. Select Sensors - Temperature and Humidity
Sensor (WiFi) from the left menu.
6. Select the WiFi network you want to connect
to and add the network password.
7. Power on the sensor. Press the Reset key for
about 10 seconds until the WiFi symbol on the
sensor screen flashes frequently.
8. Tap Next, then and select Blink quickly.
9. Wait for the application to identify your sensor.
10. After identifying the sensor, press the "+" icon
next to the sensor and, after a few seconds, press
7 - User manual
Tabla de contenido
