Troubleshoot Guide - NuWave Brio 7.25Q Manual Del Propietário

TROUBLESHOOT GUIDE

The Brio is not turning on or working.
1. The Brio is not plugged in.
2. You did not press the Power button.
3. The Base Tray is not in the Brio.
Insert the plug into an appropriate grounded power socket.
Press the Power button. Place the Base Tray into the Brio.
The ingredients fried in the Base Tray are not
completely cooked.
1. Too many ingredients were used. The cooking
temperature is too low.
2. The cooking time is too short.
Remove some ingredients from the Base Tray; smaller
batches air-fry more evenly. Cook at a higher temperature.
Set the Brio to air-fry for a longer time.
The food is fried unevenly.
1. Certain types of ingredients need to be shaken halfway
through the cooking time.
Ingredients that are on the top need to be shaken halfway
through the cooking time.
Fried snacks are not crispy when they come out of the Brio.
1. You used a type of snack meant to be prepared in a tradi-
tional deep fryer.
Use snacks designed to be baked in a traditional oven, or
lightly brush some olive oil onto the snacks before placing
them into Brio for crispier results.
Cannot properly slide the Base Tray into the appliance.
1. The Base Tray is overfilled.
Do not fill the Base Tray more than 4/5 full. Push the Base
Tray into the Brio until you hear a click.
nuwavenow.com nuwavenow.com
25 25