Opis 60S mobile Manual De Uso página 7

Example:
Hint: Test if everything is set-up correctly by sending a text message to your Opis desk-
top mobile now.
Hint: To disable all text message forwarding simply use this function without a destina-
tion number, i.e. *002#*.
⓱ Configuring for a cell phone service provider
IMPORTANT: Only use this function if there are issues operating your Opis desktop
mobile.
The number needed to identify your cell phone service provider (<nnn> from 001 to
999) can be found on the Opis Technology website at https://opis-tech.com/go/4geng
Pick-up the receiver and dial:
Format:
Example:
⓲ Reset to factory defaults
To reset all configurations of your Opis Desktop Mobile to the initial settings, pick up
the receiver and dial:
Format:
Example:
⓳ Special operating modes
Opis 4G desktop mobiles support three special operating modes, which, for example,
enable demonstration use (at trade fairs, advertising stands, etc.) and can also help
persons with memory loss.
The operating modes are each protected with a PIN number (not to be confused with
the SIM-card PIN). Only with this PIN number can a desktop mobile be reset from the
special operating mode to normal mode. Other settings cannot be changed while a
special operating mode is active and resetting the phone is not allowed.
⓳① Only quick dials and emergency calls
This mode only allows the use of quick dials as defined in ❾ as well as the emergency
numbers 112, 110 and 911. All other numbers result in the line busy tone. To enable
this mode, pick up the receiver and dial:
Format:
Example:
to forward text messages to 01234567: *002#01234567*
⇒ if the forward was set-up, the telephone rings once
*003#<nnn>* (nnn is 001 to 999 - see description above)
to set-up for AT&T USA: *003#005*
⇒ if the configuration was successful, the telephone rings once
*08*
to restore factory defaults: *08*
⇒ if the original settings were restored the phone rings once.
*00#1#<PIN>*
to enable mode 1 and set the 4-digit PIN to 1234: *00#1#1234*
7