Opis 60S mobile Manual De Uso página 3

Introduction
Welcome to the 4G version of your Opis Technology desktop mobile, your new retro-
styled mobile phone, resembling a classic fixed-line phone. This short manual provides
you with quick start guide, list of special features, and troubleshooting tips.
Quick Start
❶ Assembly
Unpack phone, charger and receiver from the box. Plug the receiver into the bottom
of the phone (1). Connect the charger to the back of the phone and plug it into any
standard household A/C power outlet.
❷ Install a SIM card
Slide your SIM card (not included) into the bottom of the phone oriented as shown (3).
For simplified operation, use a card that is not PIN locked (see ⓫)
❸ Switch it on
Slide the main switch on the base from the 0 to the 1 position as shown in (2). The two
red status lights (network and SIM card) flash alternately for about 30 seconds. The al-
ternate flashing indicates that the phone is busy. Please just wait. After some time, all
three status lights should light up briefly. (Please note that the battery light will remain
on if the phone is charging.) Afterwards the lights provide information on the phone's
status as described in section Status lights.
❹ Enter a PIN
This step is only required for a PIN-locked SIM card. Please check the status lights at
the bottom of your phone to find out if this is the case (see section Status lights). Pick
up the receiver, wait for the busy tone (see section Receiver Tones) and dial:
Format:
Example:
Note: After 3 failed attempts your SIM card will be locked and it is necessary to dial
the PUK and a new PIN:
Format:
Example:
The phone is now ready for normal operation. (If a PIN or PUK is not accepted the
E N G L I S H
<PIN (4 digits)>
if the PIN is 1234: 1234
⇒ if the PIN is accepted the phone rings once.
<PUK (8 digits)>#<new PIN (4 digits)>
if the PUK is 88888888 and the PIN is 1234: 88888888#1234
⇒ if the PIN is accepted the phone rings once.
3