Ducasa PTL BC 30 C Manual Del Usuario página 82

- E5-High water level fault. E5-Bottom tray is full--Connect the drain hose
and drain the collected water away.If protection repeats, call for service.
-
Note: When one of the above malfunctions occurs, turn off the unit, and check for
any obstructions. Restart the unit, if the malfunction is still present, turn off the
unit and unplug the power cord. Contact the manufacturer or its service agents
or a similar qualified person for service.
Exhaust hose installation
The exhaust hose and adaptor must be installed or removed in accordance with
the usage mode. For COOL,HEAT(heat pump type) or AUTO mode must be
installed exhaust hose. For FAN,DEHUMIDIIFY or HEAT(electrical heat type)
mode must be removed exhaust hose.
Operation Instructions
COOL operation
Press the "MODE" button until the "COOL" indicator light comes on.
Press the ADJUST buttons "+" or "-" to select your desired room temperature. The
temperature can be set within a range of 16°C~32°C.
Press the "FAN SPEED" button to choose the fan speed.
HEAT operation(cooling only models without)
Press the "MODE" button until the "HEAT" indicator light comes on.
Press the ADJUST buttons "+" or " - " to select your desired room temperature.
The temperature can be set within a range of 16°C~32°C.
Press the "FAN SPEED" button to choose the fan speed. For some models, the fan
speed can not be adjusted under HEAT mode.
DRY operation
Press the "MODE" button until the "DRY" indicator light comes on.
Under this mode, you cannot select a fan speed or adjust the temperature. The fan
motor operates at LOW speed.
Keep windows and doors closed for the best dehumidifying effect.
Do not put the duct to window.
AUTO operation
When you set the air conditioner in AUTO mode, it will automatically select cooling,
heating(cooling only models without), or fan only operation depending on what
temperature you have selected and the room temperature.
The air conditioner will control room temperature automatically round the
temperature point set by you.
Under AUTO mode, you can not select the fan speed. NOTE: Under AUTO mode,
both the AUTO mode and the actual operation mode indicator lights illuminate for
some models.
FAN operation
Press the "MODE" button until the"FAN " indicator light comes on.
Press the "FAN SPEED" button to choose the fan speed.
The temperature can not be adjusted.
82