Dell PowerEdge 2400 Instrucciones De Instalación

(Rev. 3/29/00) FILE LOCATION: D:\test\10MRDam1.fm

  
  
   !"# $
This document updates information contained in your Dell PowerEdge 2400 system
documentation.
When you install an 866-megahertz (MHz) processor on your Dell PowerEdge 2400
system, you must install an air baffle on the system's terminator card for single-
processor configurations.

             
To install the air baffle on the terminator card, perform the following steps:
1.
2.

      
DELL CONFIDENTIAL - PRELIMINARY
www.dell.com




All manuals and user guides at all-guides.com
Remove the terminator card from the guide bracket assembly, as described in
your Dell PowerEdge 2400 Systems Installation and Troubleshooting Guide.
Line up the holes on the terminator card with the posts on the air baffle, as
shown in Figure 1-1.
retaining tab
terminator card
4/14/00
P/N 10MRD Rev. A01 April 2000
air baffle
™