Cleaning And Maintenance - Melchioni Family SAHARA Folleto De Instrucciones

3) Let the cable go out from the hole in the middle of the support and
assembling the support itself, putting it in the inferior body.
4) Put the wing nut screws through the support and screw them.
OPERATION
The knob selects different power levels: 1= 400W;
2= 800W; 3= 1200W and switches off the device at
the "0" symbol. It can be turned clockwise and anti-
clockwise; in one direction, (clockwise) swinging is
excluded, while in the other (anticlockwise),
swinging is activated
To use the heater, act as follows:
1) Insert the plug into the power socket.
2) To switch the appliance on, turn the selector knob to the position corresponding
to the desired power setting "1-2-3".
3) To activate oscillation (right-left) turn the knob anticlockwise
4) To switch the appliance off, turn the selector to the "0" off position and remove
the plug from the power socket.
Never leave the appliance connected to the socket if it is not in use, especially
for long periods.

CLEANING AND MAINTENANCE

Attention: before cleaning the appliance, switch off, unplug and wait for
before it has completely cooled down.
• Protect the parabola from dust to keep save its reflecting characteristic.
• To clean the body use a soft damp cloth; do not use abrasive products.
• The protection grill and the smocking net are very delicate; to clean them
only use your vacuum cleaner, paying attention not to damage them.
• When the stove is not in use it is necessary to cover and put it in a dry place.
We advise to use the original packing to preserve it from dust and humidity.
21/56
.