The Twinview Menu Setup; Introduction; Activating The Menu; Navigating The Menu - Optelec TwinView Manual Del Usuario

Optelec

5. The TwinView Menu Setup

5.1 Introduction

The TwinView has two menu's: one menu for channel A and one menu for channel B. This
allows you to change all of the settings, such as brightness and contrast, per channel. For
instance, it is possible to increase the brightness and contrast for the PC output (channel
B) and decrease the contrast and brightness for the ClearView+ output (channel A).

5.2 Activating the menu

To activate the menu, first select the channel (A or B) by pressing the A or B button. The A
button can be found to the left of the cursor keys, the B button to the right. Then press the
menu button located to the left of the On/Off switch – this will activate the menu for the
selected channel. All menu changes will only apply to the selected channel. Pressing the
menu button will close the menu.

5.3 Navigating the menu

Use the up and down arrows to navigate between the menu items. The A/B button located
in the middle of the cursor cross will activate the menu item or selection.

5.4 Main Menu Setup

The main menu of the TwinView contains the following menu items:
- General: to set brightness and contrast settings
- Color: to adjust the color settings
- Image: to calibrate the image (this option is only available when the input is set to
VGA)
- Information: displays the resolution and frequency
- Language: to select the preferred menu language
- Settings: to configure the menu timeout
- Factory defaults: to restore all settings to the factory default
- Select DVI/VGA: to set the DVI or VGA port for the selected channel
- Exit: to leave the menu
TwinView
Page 15