Product Usage - Becken BFE4915WH Manual De Instrucciones

2.2. Product usage

This user manual is prepared for more than one model. Some of the
features specified in the Manual may not be available in your appliance.
INSTALLATION
• The adjustment conditions for this appliance are stated on the rating
label.
• Your stove requires a 32-40 Ampere supply. If necessary, installation
by a qualified electrician is recommended.
• Electrical connection of the stove should only be made to earthed
connections/sockets installed in compliance with local regulations. If
there are no earthed connections/sockets in place where the stove
will be installed, contact immediately a qualified electrician to install.
The manufacturer is not responsible for damages due to the stove
not being connected to an earth system.
• Your stove is for use with 230 V / 400 V AC, 50–60 Hz or 220-240 V
/ 380-415 V AC, 50-60 Hz electric supply. If your supply is different
from the specified value, contact the Customer Support Service.
• When placing your stove on its location, ensure that it is at the
counter level. Bring it to the counter level by adjusting the feet if
necessary.
• Some models are supplied without a plug-an-lead set. In this case,
use a flexible cable suitable for connection to mono phase: H05 VV-F
3G 2,5 mm2, H05 VV-F 3G 4 mm2 or for 3 phase: H05 VV-F 5G 1.5
mm2.
Vitroceramic top plate free standing electric stove | Cocina eléctrica independiente con
placa superior de vitrocerámica | Fogão elétrico com placa de vitrocerâmica
Becken FW-5056XXVW_FW-5056XXVH_ID 4509.indd 13
EN
13
19/08/2019 12:19