Becken BKGH4446 Manual De Instrucciones página 23

• You must have a gap of at least 25 mm and at most 74 mm between
the underneath of the appliance and any surface that is below it.
- An oven must have forced ventilation to install a hob above it.
- Check the dimensions of the oven in the installation manual.
- The cut-out size must obey the indication.
Installing the appliance
Follow the sequence below to install the pan support
Hole
Hole
Nail
Nail
Built-in Gas Hob | Encimera Vitrocerámica Gas | Placa Vitro Gás
1. Place the left/right pan
support on the glass next
to the nail.
2. Tear off the paper.
3. Stick the sponge around
the edge of the cut-out
hole.
1. Put the left/right pan
support on the glass
Hole
follow the nail
2. Put the middle pan
Hole
support between
Nail
them.
Nail
EN
23