Becken BKGH4446 Manual De Instrucciones página 22

Positioning
CLEARANCE REQUIRED
WHEN FITTING THE HOB WITH
A COOKER HOOD ABOVE
700mm
FO 0813
This appliance is to be built into a kitchen unit or 600mm worktop,
providing the following minimum distances are allowed:
• The edges of the hob must be a minimum distance of 60 mm from a
side or rear wall.
• 700 mm between the highest point of the hob surface (including the
burners) and the underside of any horizontal surface directly above it.
• 400 mm between the hob surfaces, providing that the underside of
the horizontal surface is in line with the outer edge of the hob. If the
underside of the horizontal surface is lower than 400 mm, then it must
be at least 50 mm away from the outer edges of the hob.
• 50 mm clearance around the appliance and between the hob surface
and any combustible materials.
22
400mm
400mm
CLEARANCE REQUIRED
WHEN FITTING THE HOB WITH
A COOKER HOOD ABOVE
700mm
400mm
FO 0813
400mm