IARP STOK Serie Instrucciones De Uso Para El Usuario página 22

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
Manual Defrost:
• Press and hold the DEFROST ˄
• The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer.
How to turn ON / OFF the light
• Press and release the
Note: Light logo is present and active only for model with glass door.
17. MALFUNCTION AND REMEDIES
Most of the functioning inconveniences are generally due to defective electrical connections.
These problems can usually be solved on the place.
POSSIBLE CAUSE
The unit is not switched on
Plug and/ or lead are damaged
Fuse in the plug has blown
Power supply
THE APPLIANCE TURNS ON, BUT THE TEMPERATURE IS TOO HIGH/ LOW
POSSIBLE CAUSE
Too much ice on the evaporator
Condenser blocked with dust
Doors are not shut properly
Appliance is located near a heat source or air flow to the condenser is
being interrupted
Ambient temperature is too high
Unsuitable foodstuffs are being stored in the appliance
Appliance is overloaded
POSSIBLE CAUSE
Loose nut/ screw
The appliance has not been installed in a level or stable position
POSSIBLE CAUSE
The appliance is not properly leveled
The discharge outlet is blocked
Movement of water to the drain is obstructed
The water container is damaged
The drip tray is overflowing
STOK
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
button for 3s;
key, the light will switch ON or OFF.
THE UNIT DOES NOT START
THE APPLIANCE IS UNUSUALLY LOUD
THE APPLIANCE IS LEAKING WATER
SOLUTION
Check the unit is plugged in correctly and switched on
Call your agent or qualified technician
Replace the fuse (UK Plug)
Check power supply
SOLUTION
Defrost the appliance
Call your agent or qualified technician
Check doors are shut and seals are not damaged
Move the refrigerator to a more suitable location
Increase ventilation or move appliance to a cooler position
Remove any excessive hot foodstuffs or blockages to the fan
Reduce the amount of food stored in the appliance
SOLUTION
Check and tighten all nuts and screws
Check installation position and change if necessary
SOLUTION
Adjust the screw feet to level the appliance (if applicable)
Clear the discharge outlet
Clear the floor of the appliance (if applicable)
Call your agent or qualified Technician
Empty the drip tray (if applicable)
2 2 / 6 0
PAGE
N° DOC