Temperature Setting And Control (Evco) - IARP STOK Serie Instrucciones De Uso Para El Usuario

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
How to switch the unit from Stand By Mode to ON mode/ How to switch the unit from ON Mode to Stand
By mode
• Press and hold the On-/Off
How to see the set point
• Push and immediately release the SET key, the set point is displayed.
Push and immediately release the SET key or wait about 15s to return to normal visualisation.
•
How to change the set point
• Push the SET key for more than 2 seconds to change the set point value.
• The value of the set point will be displayed and the "°C" starts blinking.
• To change the set value push the "
• To memorise the new set point push the SET key again or wait for 15s.
Automatic defrost
• The appliance will automatically run defrost cycles.
Note: The defrost timer starts from the time the appliance is initially powered up.
Manual Defrost:
• Press and hold the "
• The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer.
How to see recorded MINIMUM and MAXIMUM temperatures
• Press and release the "
• To reset the record press SET for 3s while the MIN or MAX temperature is displayed.
• The display will show "rSt" to confirm the RESET.
How to Lock and Unlock the keyboard
• Press both " " and "
keyboard is locked/ unlocked.

Temperature setting and control (Evco)

The front panel of the thermostat:
How to turn the machine in ON / STAND -BY status
• Press and hold the
• During the button hold the
How to unlock the keyboard (»Loc» message)
• Push any button for more than 2s, «UnL» message will appear and the keyboard will be unlocked.
Note: For safety reasons the keyboard locks automatically after 30s of keys inactivity.
To execute any operation, please unlock the keyboard first.
How to see and modify the set point
• Push and immediately release the SETkey, the set point will be showed and starts blinking;
• To change the set value push ˄ or ˅ arrows within 20s.
• To memorize the new set point value push the SET y again or wait 20s.
Automatic defrost
• The appliance will automatically run defrost cycles.
Note: The cycle starts from the time the appliance is initially powered up.
STOK
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
key for 2s.
" (up) or "
" DEFROST button for 3 seconds.
" or " " key. The recorded MIN ("Lo")/MAX ("Hi") temperature is displayed.
" key at the same time for more than 3s. The display shows "PoF"/ "Pon" to indicate that the
key for 4s, the machine will turn from ON to STAND -BY status and vice-versa.
LED will blink to show status changing.
" (down) arrows within 15s.
1. Compressor operation light
2. Defrosting light
3. Energy saving light
4. Stand-by light
5. Programming key (service agent only)
6. Machine On/Stand -by (keep pushed)
7. Manual defrost (keep pushed)
2 1 / 6 0
PAGE
N° DOC