Keysight Technologies U2300A Serie Guia Del Usuario página 52

3 Features and Functions
Table 3-7 Analog output operation overview
Operation
Analog Output
Single voltage output mode
The following SCPI commands show the sample output of a DC voltage level for
the specified DA channels.
Example 1
-> *RST;*CLS
-> SOUR:VOLT 2.5, (@201)
-> SOUR:VOLT 3.2, (@201)
-> SOUR:VOLT –3.2, (@201)
-> SOUR:VOLT? (@202)
<- 0
52
Modes
Single Voltage Output
Continuous Output
To output a DC voltage via CH 201
,
Types of Output
DC Voltage Output
– Pre-defined Waveform
– Sine wave
– Square wave
– Triangle wave
– Sawtooth wave
– Noise wave
– Arbitrary Wave
// To reset DAQ to default power-on
state, this command can be ignored if
this operation is not required
// Reference is AO_GND
// Changes output from 2.5 VDC to
3.2 VDC
// Changes output from 3.2 VDC to
–3.2 VDC
// To query the state of CH 202
// By default, CH 202 is 0 VDC
Keysight U2300A Series User's Guide