Electrical Connection - edenox TOUCH LINE 4 Manual De Instrucciones

Otherwise, contact an electrician.
Note: when contacting the Manufacturer, always indicate the model and the serial number
specified on the plate on the rear part of the machine.
Chapter 5. Safety instructions

5.5. Electrical connection

The power line must be protected with a type A residual current device with rated residual current equal to
"IΔn", 30 mA.
As a result, the maximum resistance of the earth electrode must correspond to the values indicated in the
Risk of fire and electric shock.
following table.
IΔn
Maximum resistance of the earth electrode
 All the electrical connections must be made by a qualified electrician.
(50 V)
 The appliance must be earthed.
3 A 16 Ω
 Do not use multi-plug adapters or extension cables.
50 Ω
1 A
 Connect the mains plug to the mains socket only once installation has been completed.
100 Ω
500 mA
 Do not connect the mains plug if the mains socket is loose.
300 mA 166 Ω
 Do not pull the mains cable to disconnect the appliance. Pull only the mains plug.
1666 Ω
30 mA
Make sure that all the electrical data shown on the data plate correspond to those of the system.
Otherwise, contact an electrician.
5.6. Use
Note: when contacting the Manufacturer, always indicate the model and the serial number
specified on the plate on the rear part of the machine.
Risk of injury, burns, electric shock or explosion.
The power line must be protected with a type A residual current device with rated residual current equal to
"IΔn", 30 mA.
 Do not touch the sealing bar after use. Residual heat can cause burns.
As a result, the maximum resistance of the earth electrode must correspond to the values indicated in the
 Do not modify the specifications of this appliance.
following table.
 Do not leave the appliance unattended during operation.
 Turn the appliance off after use.
 IΔn Do not use the appliance with wet hands or when it could come into contact with water.
Maximum resistance of the earth electrode
 Do not use the appliance as a work surface or as a support surface. (50 V)
3 A 16 Ω
 Do not place or keep flammable liquids, materials or objects on the appliance, or inside or close to it.
50 Ω
 1 A Do not proceed with packaging if the cover (6) has cracks or is broken.
100 Ω
500 mA
300 mA 166 Ω
30 mA 1666 Ω
You may damage the appliance.
5.6. Use
 Pay attention when you remove or insert the accessories.
 Do not force the cover (6) open during the work cycle.
 Do not force the cover (6) open during the work cycle in the case of a power cut.
Risk of injury, burns, electric shock or explosion.
 Do not place any weight on the cover (6).
 Prevent any object from falling on the cover (6)! This can compromise the integrity, causing cracks or damage.
 Do not touch the sealing bar after use. Residual heat can cause burns.
 Do not modify the specifications of this appliance.
 Do not leave the appliance unattended during operation.
 Turn the appliance off after use.
 Do not use the appliance with wet hands or when it could come into contact with water.
 Do not use the appliance as a work surface or as a support surface.
 Do not place or keep flammable liquids, materials or objects on the appliance, or inside or close to it.
 Do not proceed with packaging if the cover (6) has cracks or is broken.
You may damage the appliance.
 Pay attention when you remove or insert the accessories.
 Do not force the cover (6) open during the work cycle.
 Do not force the cover (6) open during the work cycle in the case of a power cut.
 Do not place any weight on the cover (6).
 Prevent any object from falling on the cover (6)! This can compromise the integrity, causing cracks or damage.
(25 V)
8 Ω
25 Ω
50 Ω
83 Ω
833 Ω
(25 V)
8 Ω
25 Ω
50 Ω
83 Ω
833 Ω
34
34
8/7
EN