Cleaning And Maintenance; Technical Specifications - cecotec COOK CONTROL 10400 Manual De Instrucciones

ENGLISH
container and the display will show the foodstuff's weight. Press the T button to weight more
food.
The LCD display will show the container's weight in negative if you remove the container and
the food from the platform together. Press T again and, after two seconds, the display will
show zero.
Fig. 4
Note: If the weight is lower than 100 g, the display will show Fig. 5.
If the weight is heavier than 100 g, it will display Fig. 6.
Insert the batteries
Fig. 7
Open the battery cover.
Install 3 x 1.5V AAA batteries.
After installing the batteries, put the battery cover back.
Make sure that the polarity of the batteries is the correct one, as an incorrect polarity could
cause a permanent impact on the electronic parts.
Error indication
When the power is low, the display will show Fig. 8.
When the scale is not placed on a stable surface before operating, it will show Fig. 9.
When the scale is overloaded (more than 8 kg), it will show Fig. 10.

4. CLEANING AND MAINTENANCE

Use a soft, damp cloth to clean the product's surface.
Do not immerse the appliance in water or other liquid.
Do not use abrasive scouring pads, powders or cleaners.
Do not leave the device on a wet or hot environment.
Remove the device's battery if it is not going to be used in a long time.

5. TECHNICAL SPECIFICATIONS

Product reference: 04179
Product: Cook Control 10400 Smart Healthy EasyHang
Capacity: 8 kg
Battery: 4.5 V (3x AAA)
COOK CONTROL 10400 EASYHANG 21