Additional Accessories - Evolution R90 JGS Li Instrucciones Originales

www.evolutionpowertools.com
5. If possible, use clamps or a vice to hold your
work.
6. When cutting into walls, floors or similar
areas, make sure, as far as possible, that there
are no services (gas or water pipes, electric
cables etc) in the path of the blade. Striking
hidden services could cause injury to the user and
damage to the property.
7. Always disconnect the jigsaw from the power
supply before changing the blade. Never use
damaged or distorted blades.
8. Always allow the saw to come to a complete
halt before putting it down. A running tool may
bounce uncontrollably if the blade tip contacts any
surface.
9. Always consider the work environment and
wear the appropriate personal protection
equipment. This could include dust masks, eye
protection, safety footwear etc.
(2.7) HEALTH ADVICE
WARNING: When using this machine,
dust particles may be produced. In some instances,
depending on the materials you are working with,
this dust can be particularly harmful. If you suspect
that paint on the surface of material you wish to cut
contains lead, seek professional advice. Lead based
paints should only be removed by a professional
and you should not attempt to remove it yourself.
Once the dust has been deposited on surfaces,
hand to mouth contact can result in the ingestion of
lead. Exposure to even low levels of lead can cause
irreversible brain and nervous system damage.
The young and unborn children are particularly
vulnerable.
You are advised to consider the risks associated
with the materials you are working with and to
reduce the risk of exposure.
As some materials can produce dust that may be
hazardous to your health, we recommend the use
of an approved face mask with replaceable filters
when using this machine.
You should always:
• Work in a well-ventilated area.
• Work with approved safety equipment, such as
dust masks that are specially designed to filter
microscopic particles.
(2.8) WARNING: the operation of any power tool
can result in foreign objects being thrown towards
your eyes, which could result in severe eye damage.
Before beginning power tool operation, always
wear safety goggles or safety glasses with side
shield or a full face shield where necessary.
WARNING: Some wood and wood type products,
especially MDF (Medium Density Fibreboard),
can produce dust that may be hazardous to your
health. We recommend the use of an approved
face mask with replaceable filters when using
this machine, in addition to using the dust
extraction facility.
SERIAL NO. / BATCH CODE
The serial number can be found on the motor
housing of the machine. For instructions on how
to identify the batch code, please contact the
Evolution Power Tools helpline or go to:
www.evolutionpowertools.com
(4.2) ITEMS SUPPLIED
103-0001,
103-0004
Instruction Manual
Cordless Jig saw
Multi-purpose blades
Parallel edge guide
Dust port
2Ah Battery
4Ah Battery
5Ah Battery
8Ah Battery
Single dock charger
Double dock charger

ADDITIONAL ACCESSORIES

In addition to the standard items supplied with
this machine the following accessories are also
available from the Evolution online shop at
www.evolutionpowertools.com or from your local
retailer.
Description
Multi-purpose blades
Description
2Ah Battery
R18BAT-Li2,
R20BAT-Li2
4Ah Battery R18BAT-Li4,
R20BAT-Li4
5Ah Battery R18BAT-Li5,
R20BAT-Li5
8Ah Battery R18BAT-Li8,
R20BAT-Li8
R18RCH-Li1- Single R18RCH-Li1,
dock charger R20RCH-Li1
R18RCH-Li2 -
R18RCH-Li2,
Double dock
R20RCH-Li2
charger
If you intend to store a battery for a period without use
then store battery at room temperature (0°C to 20°C)
When storing for very long periods boost charge the
battery once per year to prevent over discharge; the
Ambient temperature range for tool and battery use:
0°C to 40°C. Charging temperature: 5°Cto 40°C.
7
103-0001A,
103-0001B,
103-0001C
103-0004A
Part No
075-0200
Part No
EBAT18-Li-2
EBAT18-Li-4,
EHPB18-Li-4
EBAT18-Li-5
EHPB18-Li-8
EFC18-Li
EMC18-Li
EN