For Serviceman - EAS ELECTRIC ETH-10VB Manual De Instalación Y Manual De Usuario

OPERATION PARAMETER
COMP.RUN TIME4
EXPANSION VALUE
FAN SPEED
BACKUP HEATER1 CURRENT
BACKUP HEATER2 CURRENT
T1 LEAVING WATER TEMP.1
SCROLL
OPERATION PARAMETER
T1B LEAVING WATER TEMP.2
T2 PLATE F-OUT TEMP.
T2B PLATE F-IN TEMP.
T3 OUTDOOR EXCHANGE TEMP.
T4 OUTDOOR AIR TEMP.
T5 WATER TANK TEMP.
SCROLL
OPERATION PARAMETER
Ta Room temp
Th COMP. SUCTION TEMP.
Tp COMP. DISCHARGE TEMP.
Tw-0 PLATE W-OUTLET TEMP.
Tw-I PLATE W-INLET TEMP.
P1 COMP. PRESSURE1
SCROLL
OPERATION PARAMETER
P2 COMP. PRESSURE2
POWER CONSUMPTION
SCROLL
INFORMATION
The power consumption parameter is preparatory.
if some parameter is not be activated in the system, the parameter
will show "--"

6.9 For Serviceman

6.9.1 About For Serviceman
FOR SERVICEMAN is used for installater and service engineer.
■ Setting the composition of equipment.
■ Setting the parameters.
1000HOUR
240P
600 R/MIN
0 A
0 A
25°C
2/5
25°C
30°C
45°C
-7°C
-7°C
-7°C
3/5
25°C
25°C
25°C
25°C
25°C
200kPa
4/5
--kPa
OKWH
5/5
17
6.9.2 How To Go To For Serviceman
Go to ''MENU'' > ''FOR SERVICEMAN''. Press ''OK''.
FOR SERVICEMAN
Please input the password:
0
ENTER ADJUST
OK
■ The FOR SERVICEMAN is used for installer or service engineer.
It is NOT instended the home owener alters setting with this menu.
■ It is for this reason password protection is requierd to prevent
unanthorised access to the service settings.
6.9.3 How To Exit For SERVICEMAN
If you have set all the parameter.
Press ''BACK'', the following page will be appear：
FOR SERVICEMAN
Do you want to exit the for
serviceman?
NO
CONFIRM
OK
Select ''YES'' and press ''OK'' to exit the FOR SERVICEMAN.
After exiting the FOR SERVICEMAN, the unit will be turned off.
0 0
SCROLL
YES
SCROLL
V.2