What?
Everyday soiling on glass
(fingerprints, marks, stains
left by food or non-sugary
spillovers on the glass)
Boilovers, melts, and hot
sugary spills on the glass
Spillovers on the touch
controls
Care and Cleaning
How?
1�
Switch off the cooktop and
make sure that the residual heat
indicator ("H") is not displayed�
2� Apply a cooktop cleaner while
the glass is still warm (but not
hot!)
3� Rinse and wipe dry with a clean
cloth or paper towel�
4� Switch the cooktop back on�
Remove these immediately with a
fish slice, palette knife or razor blade
scraper suitable for Induction glass
cooktops, but beware of hot cooking
zone surfaces:
1�
Switch off the cooktop and
make sure that the residual heat
indicator ("H") is not displayed�
2� Hold the blade or utensil at a
30° angle and scrape the soiling
or spill to a cool area of the
cooktop�
3� Clean the soiling or spill up with
a dish cloth or paper towel�
4� Follow steps 2 to 4 for 'Everyday
soiling on glass' above�
1�
Switch off the cooktop and
make sure that the residual heat
indicator ("H") is not displayed�
2� Soak up the spill
3� Wipe the touch control area with
a clean damp sponge or cloth�
4� Wipe the area completely dry
with a paper towel�
5� Switch the cooktop back on�
EN-27
Important!
• When the cooktop is switched
off, the cooking zone may still be
hot! Take extreme care�
• Heavy-duty scourers, some
nylon scourers and harsh/
abrasive cleaning agents may
scratch the glass� Always read
the label to check if your cleaner
or scourer is suitable�
• Never leave cleaning residue
on the cooktop: the glass may
become stained�
• Remove stains left by melts and
sugary food or spillovers as soon
as possible� If left to cool on the
glass, they may be difficult to
remove or even permanently
damage the glass surface�
• Cut hazard: when the safety
cover is retracted, the blade in
a scraper is razor-sharp� Use
with extreme care and always
store safely and out of reach of
children�
• The cooktop may beep and turn
itself off, and the touch controls
may not function while there is
liquid on them� Make sure you
wipe the touch control area dry
before turning the cooktop back
on�