Ceasa OLYMPIA Plus Manual De Instrucciones página 46

Water
hardness
After adjusting the parameters, the display shows the volume of water that can be treated.
Technical parameters setting mode (Background)
Valve programming process. TECHNICIAN mode.
A. Technical Mode Selection
During the 6 seconds the screen L1 to connect the unit to the mains appears, press "regeneration + down" key to
simultaneously and hold for about 3 seconds to enter Menu Technical L2 (Background).
L1
*******************************
F105
*******************************
B. Adjust Parameters
Under the Technician mode (L2), you can adjust the following parameters. Operation mode (Filtration/Softening),
Valve model, control type, flow unit, volume of resins, interval of regeneration days, backwash time, Brine and show
resin time, brine and fast rinse time.
Values
Set Language
Set Type
Set Flow
Rate Unit
46 OLYMPIA PLUS-CEASA
All manuals and user guides at all-guides.com
1.Pulsar "validation" and enter "Set parameters" menu,
as shown in Figure LR1.
2. Press the (▼) 2 times and select the "Set Water
Hardness"; then press "validation" and LR4 screens appears.
The hardness value "150" will blink, and by (▼▲) is introduced
The hardness value measured at the entrance.
3. Finally, press "validation" and hear a "beep" that confirms
the memorization of changes.
›› Set Mode
►►►►►►
Programming steps
Under the Technician mode (L2)
1. Select "Set Language" parameter by (▼▲)
2. Press "validation" and select Español or English (LT1)
3. Press "validation" to return to the Technician mode (L2)
Under the Technician model (L2)
1. Select "Set Type" parameter by (▼▲)
2. Press "validation" and select Cronometric or Volumetric (LT2)
3. Press "validation" to return to the Technician mode (L2)
Under the Technician model (L2)
1. Select "Set Flow Rate Unit" parameter by (▼▲)
2. Press "validation" and select gal, liters or m³ (LT3)
3. Press "validation" to return to the Technician mode (L2)
Set Valve Model
Set Type
Set Flow Rate Unit
↓
LR4
Set Water
Hardness
150 mg/L
Screen
LT1
Set Language
○ Español
● English
LT2
Set Type
↑
○ Cronometric
● Volumetric
LT3
Set Flow Rate Unit
○ gal
○ L
● m³