Efco AT900 Manual De Instrucciones página 32

P2
P3
L
Observing the previous picture too:
8. Unscrew the knob P1 of the clamp
that secures the sleeve D to the elbow
and remove it.
9. Unthread the screw form the upper
end of the clamp.
10. Insert the widen ring of the chain L
P1
on the screw.
11. Insert the extreme with the widen ring
of the longer chain M (150 cm) on the
screw and then let the chain fall to the
ground. This is the chain that
discharges
electrostatic energy.
12. Close the clamp and screw again the
knob P1.
13. Unscrew the knob P2 of the clamp
that fix the flexible hose E to the
sleeve D and remove it.
14. Unthread the screw form the upper
end of the clamp.
15. Insert the widen ring of the chain L
on the screw.
16. Close the clamp and screw again the
knob P2.
17. Unscrew the knob P3 of the clamp
that secures the flexible hose E to the
throwing pipe and remove it.
18. Unthread the screw form the upper
end of the clamp.
19. Insert the widen ring of the chain L
on the screw.
20. Close the clamp and screw again the
knob P3.
32
to the ground the