Efco AT900 Manual De Instrucciones página 26

D
S
D
A1
B
R
D
19. Insert the sleeve D for the regulation
F
20. Insert one of the bushes for the
B B
21. Insert the corrugated tube Ø 30 for the
D
22. Fix the the corrugated tube Ø 30 for
26
of the powder/granular on the elbow of
the machine and fix it with the clamp
F, supplied with the kit.
calibration of the flow S in the sleeve
D, as shown in the picture.
exit of the powder and granular B (that
at the point 12 has been connected to
the tank A in the attachment A1) in
the sleeve D.
the exit of the powder and granular B
to the sleeve D with the clamp R.