Lovi LS-BE221 Manual página 6

During this time, the temperature of the water in the warmer will be maintained at the indicated level.
•
After 3 hours, the appliance will automatically end the cycle, signalling it with a "Dee-Dee-Dee" sound.
•
For the safety of your children, always check the temperature of the food before feeding. Place a small amount
of the food on the inner part of your wrist - as the skin is delicate and sensitive at this spot.
To stop the warmer during the cycle, press the button
8.
power supply.
In the LOVI warmer, you can easily defrost gradually in a water bath food frozen in a storage bags or containers
dedicated for food freezing.
Place the warmer on a flat and stable surface, out from the reach of children, and where it cannot be knocked or
1.
moved during use. If you have any doubts, read the warnings at the beginning of the instructions again.
Add about 200 ml of water to the empty heating chamber.
2.
Place the basket in the warming chamber.
3.
Put the frozen food in a bag or container into a basket.
4.
Plug the warmer into the power socket.
5.
Press the power button. Remember! Never turn on the warmer when there is no water in it.
6.
Press the function button, selecting the bottle mode, and then use the „-" button to set the temperature to 35˚C.
7.
As in the case of heating food in a bottle/container, the defrosting time depends on the same factors and its exact
determination is not possible.
After complete defrosting, shake or stir the container to mix the separated fat particles with the remaining volume
8.
of milk and pour into the bottle. To heat the milk placed in bottle to a temperature suitable for serving to a child,
use the „fast heating" mode.
Note!
NEVER defrost the food by using the "fast heating" mode.
•
NEVER refreeze previously defrosted milk.
•
Dispose of any milk that has not been used.
•
In the LOVI warmer you can easily team disinfect a bottle and other small accessories used for bottle and breast feeding
(e.g. breast covers).
Place the warmer on a flat and stable surface, out from the reach of children, and where it can't be knocked or
1.
moved during use. If you have any doubts, read the warnings at the beginning of the instructions again.
Add 75-85 ml of water to the empty heating chamber.
2.
Place the basket in the heating chamber.
3.
Important! Before beginning steam disinfecting process, wash all the elements according to the instructions provided
by their manufacturer, and rinse thoroughly.
4. Insert a bottle into the basket (upside down) or loosely arrange small accessories such as a feeding teat, cap, sealing
disc, and bottle cap (bottom up).
When steam disinfecting other accessories used for babies or nursing mothers, place the items in the basket in such a way
as to leave enough room for the hot vapour to reach them easily.
Place fitting ring onto the warmer body to limit the amount of hot vapour that escapes.
5.
Plug the warmer into the power socket.
6.
Press the power button. Remember! Never turn on the warmer when there is no water in it.
7.
Press the function button selecting the "fast heating" option with the
8.
to turn off the warmer, and then disconnect it from the
FOOD DEFROSTING
STEAM DISINFECTION
icon.
6