JANE CONCORD REVERSO i-PLUS Manual Del Usuario página 14

_ USING THE BABY INSERT (40 CM - 60 CM)
For babies 40 cm - 60 cm in height, the REVERSO is equipped with a baby insert.
The inclination of the REVERSO with baby insert must be adjusted as flat as possible. (Adjustment of
the seat inclination - refer to 1d)
2a Loosen the belt system by simultaneously pressing the central adjuster (13) and carefully pulling
the crotch strap (12). Open the belt lock. Rotate the control for the size adjustment (02) to place
the head support of the REVERSO in the middle position. Position the baby insert (07) in the
REVERSO and guide the belts through the belt guides provided.
2b Sit your baby in the baby insert (07). Guide the shoulder belts over the shoulders and together at
the front of the child.
2c Close the belt lock.
2d Using the control for the size adjustment (02), adapt the position of the belt guide to the size of
your child. The shoulder harness guide should be situated slightly above the shoulder of the child.
The shoulder harnesses should be routed in the middle, between the neck of the child and outer
edge of the shoulder.
2e Tighten the belt system (12) by pulling on the central belt (14), so that it is close-fitting across the
body of the child.
EN
22
_ SECURING THE CHILD (60 CM - 105 CM)
For children taller than 60 cm, the REVERSO must only be used WITHOUT the baby insert.
3a Loosen the belt system (12) by simultaneously pressing the central adjuster (13) and carefully
pulling the crotch strap (12). Open the belt lock and clamp the shoulder belts between the head
support (01) and shoulder area.
3b Sit the child in the REVERSO. Guide the shoulder belts over the shoulders of the child and together at the
front of the child.
3c Close the belt lock.
3d Using the control for the size adjustment (02), set the head support to the size of your child.
The shoulder harness guide should be situated slightly above the shoulder of the child.
The shoulder harnesses should be routed in the middle, between the neck of the child and outer edge of
the shoulder.
3e Tighten the belt system (12) by pulling on the central belt (14), so that it is close-fitting across the body
of the child.
The inclination of the REVERSO can be variably adjusted (refer to 1d).
EN
23