JANE CONCORD REVERSO i-PLUS Manual Del Usuario página 13

_ OVERVIEW
01 Headrest
02 Size adjustment operation
03 Seat tilt operation
04 Support leg lock
05 Support leg
06 Safety display support leg
07 Baby insert (40 > 60 cm)
08 Footrest
09 ISOFIX system release
10 ISOFIX connectors
11 Safety indication ISOFIX system
12 3-Point belt system
13 Central adjusting device
14 Central harness
EN
20
_ INSTALLATION OF THE REVERSO
Always install the REVERSO WITHOUT your child in it.
1a Position the REVERSO on the required seat in the vehicle opposite to the direction of travel.
1b Push the ISOFIX connectors (10) of the REVERSO onto the ISOFIX receptacles of the vehicle until they
audibly engage. Check to make sure that both safety indicators (11) left and right on the REVERSO are
GREEN.
1c Release the lock (04) and move the support leg (05) downwards until this stands firmly on the floor.
Engage the lock (04) and check to make sure that the safety indicator of the lock (04) and safety
indicator of the support leg (06) are GREEN.
1d By rotating the control of the seat inclination (03), the inclination of the REVERSO can be variably
adjusted. Subsequently, check to make sure that all safety indications (04 & 06) are GREEN.
EN
21