Uline H-4405 Manual Del Usuario página 2

3. Attach the remaining two boards to form the table
top using the 3/8" bolts, washers and nuts.
(See Figure 2)
Figure 2
4. Turn the table upside down.
5. Attach the support braces to the leg frames using
the brace hardware: 5/16" bolts, washers and nuts.
(See Figure 3)
NOTE: For a cleaner end look, insert the bolt
through the support brace first and attach
with the washer and nut. When the table is
upright the bolt head is exposed, not the
bolt end and nut.
Figure 3
PAGE 2 OF 6
ASSEMBLY CONTINUED
6. Connect the support braces to the center brace.
7. Attach the center brace to the table top using self-
Leg Frame
8. Turn the table right-side up.
9. Attach the remaining two boards for the seats using
Support Brace
1-800-295-5510
uline.com
(See Figure 4)
Support Braces
Figure 4
tapping screws so the tabletop is level. (See Figure 5)
Figure 5
the 3/8" bolts, washers and nuts. Tightly secure all
bolts. (See Figure 6)
Figure 6
Center
Brace
Center
Brace
0321 IH-4405