Ritter ESM 50 Instrucciones De Montaje Y De Uso página 20

Risk of injury
– Always remove the plug-in
power supply from the socket
in the event of a charging sta-
tion malfunction. When doing
so, pull on the plug and not on
the cable.
– To avoid the risk of personal
injury, stop using the appliance
immediately if any parts are
damaged. Have the complete
appliance inspected at an
authorized service location
before using it again.
– If the plug-in power supply or
the power cord is damaged, it
must be replaced by an orig-
inal plug-in power supply or
power cord, which is available
from the manufacturer or the
manufacturer's national after-
sales service.
– Never switch the hand blender
on when you are cleaning
it, connecting or disconnect-
ing its attachments or when
replacing parts or accessories.
Keep your fingers away from
the buttons to prevent the
appliance from switching on
accidentally. Never touch the
blades on the attachments, as
these are very sharp.
– Food may splash out of the
cup during processing. For this
reason, allow hot food to cool
before processing to avoid
scalding.
– If using the hand blender in a
saucepan, remove the sauce-
pan from the hot plate before
processing.
– Ensure that the slot on the
attachment you are using is
sitting squarely and firmly on
the drive shaft pin. If attach-
ments are loose or not firmly
attached to the pin, they must
not be used and must be
replaced.
Risk of explosion
– Protect the battery from
exposure to heat and fire.
English
13