Password Change; Dvr Functions; Manual Recording - urmet domus 1093/064S Guía Rápida

2.4.1

PASSWORD CHANGE

Use " " to shift the "active frame" onto the "Password" box, press "Edit" and enter a new password.
The password is a maximum 16 number combination. To enter the sequence of numbers in a password, use the number keys on
the front of the panel (press "Edit" to cancel a character). The entered numbers will be replaced by a "*" symbol on the screen for
privacy.
After entering the password, press "Enter" to quit entry mode.
Use " " to shift the "active frame" onto the "Verify" box, press "Edit" and enter the new password.
The password will be saved and become effective if the two passwords are the same.
An error message will appear indicating the fault if the entered password and the check password are different.
In this case, press "Enter" to go back to the previous menu and repeat the entry procedure.
eIMPORTANT NOTE
Only numeric passwords if new users are programmed in local mode (i.e. using the front panel of the DVR).
x
Alphanumeric passwords may be created using the software.
It will not be possible to access the device in local mode (i.e. using the front panel) if an alphanumeric
x
password is chosen.
For safety reasons, the password is case-sensitive.
x
3

DVR FUNCTIONS

3.1

MANUAL RECORDING

Press "REC" on the front panel of the device in LIVE mode.
The following login window shown in the following figure will appear.
The selected item is highlighted.
Press arrows " " to point the cursor to the various menu items.
Press "ESC". to quit the menu.
eIMPORTANT NOTE
The device will resume recording only recording tasks programmed in the Recording menu after a blackout.
x
Recordings started manually will not be resumed after a blackout.
DS1093-024
All manuals and user guides at all-guides.com
Figure 27: password error message
Figure 28: recording menu for device Ref.1093/066S
42