Schwinn Discover HYBRID Manual Del Proprietário página 47

Adjust the Handlebar Angle (with adjustable handlebar)
❶ Using a 5 mm Allen wrench loosen the bolt at the front of
the stem. Important: Do not loosen the bolts on the side of
the stem. Figure 4.34
❷ Grasp the stem of the handlebar and rotate to the desired
angle. Figure 4.35
❸ Re-tighten the handlebar bolt at the front of the stem, and
check the handlebar is securely attached and cannot move.
❹ Once you have adjusted the angle of the handlebar check
the angle of the reflector (if mounted on the handlebar) and
cables to be sure they are facing forward. Refer to Section 1,
Fig. 1.2: Seat Height and Handlebar Reach for guidelines.
Do not loosen
the side bolts
2
Grasp here
and rotate to
desired angle
Adjustments 4
1
Figure 4.34
3
Figure 4.35
45
45