Technical Specifications - Selco Unistep 3500 Instrucciones De Uso

7 TECHNICAL SPECIFICATIONS

Power supply voltage U1 (50/60Hz)
*
Zmax (@PCC)
Slow blow line fuse
Maximum input power (kVA)
Maximum input power (kW)
Power factor PF
Max. input current I1max
Effective current I1eff
Duty factor (x=25°C)
(x=60%)
(x=100%)
Duty factor (x=40°C)
(x=60%)
(x=100%)
Adjustment range I2
Step
Open circuit voltage Uo
IP Protection rating
Insulation class
Dimensions (lxdxh)
Weight
Power supply cable
Manufacturing Standards
UNISTEP 3500
*
This equipment complies with EN/IEC 61000-3-11.
*
This equipment complies with EN/IEC 61000-3-12 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.
UNISTEP 4500
*
This equipment complies with EN/IEC 61000-3-11/12 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.
All manuals and user guides at all-guides.com
UNISTEP 3500
3x230/400Vac ±15%
262mΩ
35/20A
16.6kVA
15kW
0.96
23.9A
15.1A
(x=40%) 350A
320A
260A
(x=35%) 350A
300A
240A
30-380A
3x10
50V
IP21S
H
1060x400x780 mm
123 Kg.
4x6 mm2
EN 60974-1
EN 60974-10
UNISTEP 4500
3x230/400Vac ±15%
176mΩ
50/30A
24kVA
22.9kW
0.96
34.8A
22A
(x=45%) 450A
390A
320A
(x=40%) 450A
370A
300A
30-480A
3x10
50V
IP21S
H
1060x400x780 mm
139 Kg.
4x6 mm2
EN 60974-1
EN 60974-10
29