Programming And Configuration; Info Display - gefran 600 Manual De Uso

LEVEL 1 MENU
P.V. / S.V.
P.V. / S.V.
Process variable (PV display)
Work Setpoint (SV display) or control
output value with controller in manual
sp
Local Setpoint -
SP. 1
Setpoint 1
SP. 2
Setpoint 2
in. 2
Ammeter input value
(with CT input present)
al. 1
Alarm point 1 (scale points)
al. 2
Alarm point 2 (scale points)
al. 3
Alarm point 3 (scale points)
a. x b
Heater break alarm point
scale points of ammeter input)
0V. P
Control output value
(+Heat / -Cool)
(*) The automatic return PV/SV display is disabled for these displays
If Inc, Dec, F keys are not pressed within 15 sec, display returns
automatically to P.V. value.
N.B.:
Once a particular configuration is entered, all unnecessary parameters are no longer displayed
OUTPUT 2 INPUT /OUTPUT 3
0 = None 0 = None
1 = Relay 1 = Relay
2 = Logic 2 = Logic
3 = Triac 3 = Continuous
4 = Analog
5 = In TA
6 = In digital
Example: 1 1 1 = R + R + RS 485
6 • PROGRAMMING and CONFIGURATION
(*)
(*)

• InFo Display

SERIAL COMMUNICATION / OUT4
0 = None
1 = RS 485
2 = Relay
INF
CFG
SEr
InP
Out
NO
sw
conf=ON
PAS
NO
PAS = 99
Pro
Hrd
Lin
U.CA
Information
INF
display
upd
Software
version
(od
Instrument
code
err
Self diagnostic
error code
(. x d
Configuration
21
Information display
Custom menu
Serial communications
Input settings
Output settings
Keep the F key
pressed to scroll
Password
Release the F key
displayed menu
Press the F key to
Protection code
Keep the F key
pressed to exit any
Hardware configuration
Keep F + Auto/Man
keys pressed for 2
sec. on any menu
to go immediately
Input linearization
to level 1 display
User calibration
0 No Error
1 Lo
2 Hi
3 ERR
4 SBR
+8 error OUT2 card recognition
+16 error OUT3 card recognition
hrd
the menus
to select the
access the
parameters
menu