Idiomas disponibles
Idiomas disponibles
• Ensure that the socket conforms to the apparatus' plug.
• Ensure that the voltage indicated on the motor block corresponds with the power that is intended to connect
the apparatus to.
• Avoid positioning the suction aperture next to delicate parts of the body such as eyes, mouth, ears, etc., while
the apparatus is functioning.
• Ensure that the floater, that has the function to stop the suction when the keg is completely filled with liquid or
in case of tipping over, does not show any damages or clogging that might prevent the suction. Regularly clean
the floater (water level limiting device) according to the instructions and control for any damage signs.
• ATTENTION this apparatus is not suited to pick up dangerous dust.
• ATTENTION: do not suck inflammable substances (ashes from fire-place), explosive, toxics or dangerous to
the health. The maximum temperature allowed is (40°C / 104° F).
• ATTENTION: the apparatus is not suitable for areas protected against electrostatic discharges.
•. ATTENTION: use only the brushes supplied with the apparatus or those specified in the instruction manual.
Using other brushes
• ATTENTION: don't leave the apparatus unattended while is in function. Always remove the plug from the
socket when not using the apparatus and store it away from the reach of children or people who are not
conscious of their own actions
• ATTENTION: in case o foam or liquid discharge switch off immediately.
• ATTENTION: in case tipping over, lift the apparatus before switching off.
• Do not aspire water from containers, sinks, basins, etc.
• Do not aspire aggressive detergents because they could damage the apparatus.
• Do not aspire materials that could damage the filtering elements (such as glass, metal etc.).
• Do not ever pull or lift the apparatus through the electrical cable.
• Do not immerge the apparatus into water and neither use water jets to clean it
• Always remove the plug from the current socket before undertaking any type of intervention on the apparatus
or if it is left unattended or within children or people's reach not quite conscious of their own actions.
• Regularly control the feeding cable looking for damages, cracks or ageing. Substitute the cable before using it
further.
• If the feeding cable is damaged it must be substituted by the manufacturer or by its after sales service or in
any case by a similarly qualified person, thus preventing any possible risk.
• When using extension electric wires ensure that they are lying on dry surfaces and protected against possible
water jets.
• Specialized personnel must always carry out maintenance and repairs; any damaged part must be substituted
with original spare parts.
• ATTENTION: if the apparatus is fitted with a supplementary plug, do not exceed the power reported on the
plug. Non-compliance with this norm could cause fires and damages even lethal to the user
• ATTENTION: it is forbidden to carry out changes to the apparatus. Tampering could cause fires and damages
even lethal to the user and the forfeiture of the guarantee.
• The manufacturer declines any responsibility for damages caused to people or things due to non-compliance
with these instructions or if the apparatus is unreasonably used.
Other ways to optimise performance:
This equipment is suitable for periodic duty. Once it has been in use for 90 minutes, it
should be allowed to cool for at least 30 minutes.
The use of a microfilter cartridge is recommended when picking up large
quantities of fine dust particles.
When picking up liquids, make sure that the floater ball in the floater system is able to move
freely.
NOISE LEVEL: Values measured according to EN 60704 - 1 (1997) / EN 60704 -2 - 1 (2001) rules.
Measurement A for the sound pressure level of the machine is < 80 dB (A) Under unfavourable feed conditions,
the appliance may cause temporary drops in voltage.
Do not dispose of power tools into household waste! According to the European Directive 2002/96 EC
on waste electrical and electronic equipment (WEEE) and its incorporation into national law, power
tools that are no longer suitable for use must be separately collected and sent for recovery in an
environmental- friendly manner.
- 9 -
