Switching On And Off; Care And Maintenance - Hilti SIW 6-22 Manual De Instrucciones Original

Ocultar thumbs Ver también para SIW 6-22:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

6.2 Switching on and off

1. To switch the product on, press the control switch.
Speed can be controlled steplessly by varying how far the control
switch is pressed in.
2. To switch the product off, release the control switch.
7

Care and maintenance

WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance
tasks!
Care of the product
Carefully remove stubborn dirt.
Carefully clean the air vents, if present, with a dry, soft brush.
Use only a slightly damp cloth to clean the housing. Do not use cleaning
agents containing silicone as these can attack the plastic parts.
Use a dry, clean cloth to clean the contacts of the product.
Care of the Li­ion batteries
Never use a battery with clogged air vents. Clean the air vents carefully
using a dry, soft brush.
Avoid unnecessary exposure of the battery to dust and dirt. Never
expose the battery to high levels of moisture (e.g. by being dipped in
water or left in the rain).
If a battery has been soaked by moisture, treat it as a damaged battery.
Isolate it in a non-flammable container and consult Hilti Service.
Keep the battery free of extraneous oil and grease. Do not permit dust
or dirt to accumulate unnecessarily on the battery. Clean the battery
with a dry, soft brush or a clean, dry cloth. Do not use cleaning agents
containing silicone as these can attack the plastic parts.
Do not touch the contacts of the battery and do not remove the factory-
applied grease from the contacts.
Use only a slightly damp cloth to clean the housing. Do not use cleaning
agents containing silicone as these can attack the plastic parts.
Maintenance
Check all visible parts and controls for signs of damage at regular
intervals and make sure that they all function correctly.
Do not use the product if signs of damage are found or if parts
malfunction. Immediately have the product repaired by Hilti Service.
After cleaning and maintenance, install all guards and protective devices
and check that they are in full working order.
14
English
2282354
*2282354*
Tabla de contenido
loading

Tabla de contenido