Changing Air Direction; Exhaust Air Vent - Hisense 12K BTU Instrucciones De Instalacion Y Uso

Sleep
NOTES: When you press sleep button
■ In the Cooling mode, Dry mode, ECO mode,
temperature will increase by 4°F(2°C)at most, during 2hours,
and continues runnin g a t that tem p erature until auto shut off .
■ In Heating mode, the set temperature will decrease by 4°F(2°C)
at most, during 2hours, and continues running at that
temperature until auto shut off.
1. Press MODE to select Cool, Dry or ECO
2. Press FAN to select High, Med or Low.
3. Press the up or down arrow button to set the temperature.
4. Press SLEEP. After 10 seconds, the lights on the control
panel display will dim.
NOTE: The mode and temperature may be adjusted during
Sleep control. Fan speed is automatically set to LOW.
5. T o turn off Sleep contro l , press SLEEP aga i n. or wait 8 hours
for the air conditioner to turn off automatically.
NOTE: The air conditioner wil l return to previous settings after
Sleep control is turned off.
Use the Vertical Level Vane to direct the air right or left. Use the whole cartridge to direct air up, down or straight ahead.
B
Pull out the exhaust air vent control to Open the exhaust air
■
vent and draw stale or smoky air from the room.
Push in the exhaust air vent control to close the exhaust air
■
vent for maximum continuous cooling.
To set timer for a 1-24 hour delay on-off operation:
the set
1. Press TIMER on remote control, LED display on the air

Changing Air Direction

A
A. Vertical Level Vane
B. Cartridge

Exhaust Air Vent

NOTE:
13
Timer
conditioner control panel will flash.
2. Press up or down arrow button to change the delay time from
1 hour to 24 hours.
3. Press TIMER on remote control again for TIMER
confirmation and TIMER indicator light on the air
conditioner control will be on .
4. To cancel the TIMER, press the TIMER on remote and
the TIMER indicator light will be off.
Filter
1. When the Filter indicator light is lit, remove, clean and
replace the air filter. See "Cleaning the Air Filter".
2. Press Power button on the machine, or FILTER button
on remote to reset the filter, after cleaning and replacing
the air filter.
NOTE:
When the light is on, it will remain on for 180
hours or until you press Clean Filter button.
A A. Exhaust air vent control
The exhaust air vent control will function only when the
fan is running .