Operation; Switching The Tv Set On And Off - TechniSat HD-Vision 32 Instrucciones De Funcionamiento

Selecting the reception signals
> Use the up/down arrow buttons to select the reception signals
(DVB-S for digital satellite programmes, DVB-C for digital
cable programmes, DVB-T for digital terrestrial programmes,
Analogue CT for analogue terrestrial and cable channels or FM
Radio for FM radio stations).
> Use the right/left arrow buttons to set whether the selected
reception signal is available at your location (Yes) or not (No).
> Afterwards, use the up/down arrow buttons to mark the Proceed
fi eld and then confi rm with OK to accept your selection.
DiSEqC confi guration (DVB-S)
In this installation step, you can adjust your television's settings to
suit the confi guration of your satellite antenna.
> If you want to use the standard antenna settings, use the up/
down arrow buttons to mark the Standard fi eld and confi rm
with OK.
In this case, proceed with the „Antenna settings (DVB-T)"
menu item.
> If the confi guration of your receiving installation does correspond
to the standard setting, mark the Manual fi eld and confi rm with
OK.
> Now adjust the antenna settings to suit your receiving installation
as described in Section 7.5.1.
> Next, use the arrow buttons to mark the Proceed fi eld and
confi rm with OK.
In the next step, check your satellite antenna's confi guration
once more.
> If you want to accept the confi guration, use the up/down arrow
buttons to mark the Yes fi eld and confi rm with OK.
Antenna settings (DVB-T)
If you are using an active DVB-T antenna that does not have a
separate power supply, you can feed it with power from the TV set
via the coaxial cable. To do so, set the Antenna feed to On.
> Use the right/left arrow buttons to switch the power supply On
or Off.
> Use the up/down arrow buttons to mark the Proceed fi eld and
confi rm with OK.
Software update
Your TV set will now check whether a newer version of the operating
software is available. If a newer version is available you can perform
an automatic software update.
> Use the right/left arrow buttons to mark the Update fi eld and
confi rm with OK.
The new software for your TV set will now be downloaded. This
process can take some time.
Program search/ISIPRO
(only DVB-S)
There are various options available that allow you to search for
new channels or to update the program list. You can either use
the ISIPRO program list function (if available) to download a new
satellite program list for your TV set from satellites or you can
make the television perform a program search.
All manuals and user guides at all-guides.com
> If an up-to-date program list is available, you can download
> Confi rm with the OK button.
If you want to perform a program search, please proceed as
follows:
> Use the up/down arrow buttons to mark the All channels fi eld
> You can start the automatic program search by pressing the
Quitting the installation assistant
> Confi rm the fi nal notice displayed by the installation assistant

6.1 Switching the TV set on and off

Switching on using the power switch on the TV set
> Switch on the TV set by operating the power switch at the back
The TV set now performs an initialisation and cannot be
operated whilst this is taking place. This process can take a
few seconds.
Switching on from standby mode
> Switch on the TV set by pressing the On/Standby button on the
> by pressing the Program +/– buttons on the remote control or
or
> by pressing one of the numerical buttons (0 to 9) on the remote
or
> by switching on a device that is connected to one of the external
EN
it by using the up/down arrow buttons to mark the ISIPRO
Program list update menu item.
This function is only available if a program list newer
than the one already stored on your TV set is available for
download.
The current program list will now be downloaded via satellite.
Please take note of the additional on-screen information.
if you want to search for both freely receivable and encrypted
channels or mark the Free only option if you just want to search
for freely receivable channels.
OK button. The reception areas that you selected will now be
automatically scanned for TV channels and radio stations.
This process can take a few minutes.
Please take note of the additional on-screen information.
with OK to return to normal mode.

6 Operation

of the TV set near the top.
remote control/TV set
or
on the TV set
control
inputs. (If the autostart function is activated, see Section 10).
The operating status is indicated by the green LED indicator.
8