All manuals and user guides at all-guides.com
Westward Operating Instructions and Parts Manual
Indicates factors concerned with assembly, installation, operation, or maintenance,
which could result in damage to the machine or equipment if ignored.
Please read this operator's manual carefully. Ignoring this manual may result
in electric shock, fire and/or serious personal injury.
Important Safety Instructions
When using electric appliances, basic precautions should always be followed,
including the following:
1.
Read all the instructions before using the appliance.
2.
To reduce the risk of injury, close supervision is necessary when an appliance is used near
children.
3.
Do not contact moving parts.
4.
Only use attachments recommended or sold by the manufacturer.
5.
Do not use outdoors.
6.
For a cord‐connected appliance, perform the following steps:
To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.
-
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
-
Unplug from outlet when not in use and before servicing or cleaning.
-
Do not operate any appliance with a damaged cord or plug, or after the appliance
-
malfunctions or is dropped or damaged in any manner. Return appliance to the
nearest Authorized Service Center for examination, repair, or electrical or mechanical
adjustment.
7.
For a portable appliance – To reduce the risk of electrical shock, do not place the motor in
water or other liquids. Do not place or store appliance where it can fall or be pulled into a
tub or sink.
8.
For a grounded appliance – Connect to a properly grounded outlet only. See Grounding
Instructions.
Grounding Instructions
This appliance must be grounded. In the event of malfunction or breakdown, grounding provides
a path of least resistance for electric current to reduce the risk of electric shock. This appliance is
equipped with a cord having an equipment‐grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
Improper connection of the equipment‐grounding conductor can result in a risk
of electric shock. The conductor with insulation having an outer surface that is green with or
without yellow stripes is the equipment‐grounding conductor. If repair or replacement of the
cord or plug is necessary, do not connect the equipment‐grounding conductor to a live terminal.
Check with a qualified electrician or serviceman if the grounding instructions are not completely
understood, or if in doubt as to whether the appliance is properly grounded. Do not modify the
plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
This appliance is for use on a nominal 120 V circuit, and has
a grounding plug that looks like the plug illustrated in the
figure. The temporary adaptor should be used only until a
properly grounded outlet can be installed by a qualified
electrician. The green colored rigid ear, lug, and the like,
extending from the adaptor must be connected to a
22XP38, 22XP39
Drain Cleaning Machine
3