Before First Use; Measuring Water Hardness; Claris - Aqua Filter System Cartridge; Installing The Filter - Krups ESPRESSERIA AUTOMATIC PREMIUM Manual Del Usuario

IFU KRUPS Nafta_Premium_USA_xxxxxxxx 31/05/10 14:33 Page6
Before using the machine for the rst time, you will need to complete an initial set up procedure to ensure the machine will
operate properly. You will be asked to set the water hardness level, language, clock, date, and a few other options. The digita
display will walk you through each step and the initial set up takes just a few minutes. Please note, if you disconnect the
machine from the power source, you will need to complete parts of this process again.
1 sec.
Fill a glass with the water
you normally use and
immerse the test strip.
Degree of
hardness
° f
° dH
° e
To optimize the taste of your co ee and the lifetime of your appliance, we recommend that you use the Claris – Aqua Filter
System cartridge sold as an accessory (F088).
It consists of an anti-scale substance and active carbon which reduces the chlorine, impurities, lead, copper and pesticides in
the water. The minerals and trace elements in the water, however, are preserved.
F 088
Your appliance will indicate when the Claris – Aqua Filter System cartridge needs changing by displaying a mes-
sage. The Claris cartridge needs to be replaced approximately every 13 gallons/50 litres of water or at least every
two months. Set the hardness of the water to 0 if you use a Claris cartridge.
INSTALLING THE FILTER (CLARIS – AQUA FILTER SYSTEM CARTRIDGE)
To prime the cartridge correctly, follow this procedure every time you install the lter.
Installing
the cartridge in
the machine:
Screw the ltering
cartridge into the
bottom of the
water tank using
the spanner
provided.
All manuals and user guides at all-guides.com

BEFORE FIRST USE

MEASURING WATER HARDNESS

0
After 1 minute the hardness measurement will appear.
This is the number you will be asked to program into the machine.
0 1
very soft soft
< 5.4° > 7.2°
< 3° > 4°
< 3.75° > 5°
CLARIS – AQUA FILTER SYSTEM CARTRIDGE F088
By ltering the water with the
Claris – Aqua Filter System car-
tridge, you can reduce:
Carbonate hardness – up to 75%*
Chlorine – up to 85%*
Lead – up to 90%*
Copper – up to 95%*
Aluminium – up to 67%*
* indications supplied by the manufacturer
1 2
2 3
moderately hard hard
> 12.6° > 25.2°
> 7° > 14°
> 8.75° > 17.5°
Put a Using for the rst time: Choose "YES"
17 oz/0.5 l
option in the "Water lter" menu and
container
follow the instructions on the screen.
under
To install later or replace the lter :
the steam
select the "Water lter" menu using
nozzle.
the
"Water lter"-OK-"Install" (or
"Change")-OK- and follow the instruc-
tions on the screen.
6
l
4
3
4
extremely hard
> 37.8°
> 21°
> 26.25°
Mechanism which memo-
rises the month in which the
cartridge was installed and
changed (after a maximum
of two months).
button: "Services"-OK-