Frothing Milk; Auto-Cappuccino Set Xs6000; Preparing Hot Water - Krups ESPRESSERIA AUTOMATIC PREMIUM Manual Del Usuario

IFU KRUPS Nafta_Premium_USA_xxxxxxxx 31/05/10 14:33 Page10
We recommend that you use pasteurised 1 or 2% milk. The milk should be quite cold, ideally bet-
ween 42° F and 50° F (6 and 10° C). After having used the steam or hot water functions, the nozzle
may be hot, and we recommend that you wait for a few moments before handling it.
Check that the steam
nozzle is correctly
installed.
To remove any remaining milk
from the steam nozzle, place a
cup under the nozzle and press
the " hot water " button .
To interrupt the steam function, press any button.
If the nozzle is blocked, clean it out with the included needle.
The maximum duration for production of steam per cycle is limited to 2 minutes.
The auto-cappuccino accessory makes it easy to prepare a cappuccino or a ca e latte. It is comprised of a special nozzle with
two-positions/markings and a brushed stainless steel milk jug and tubes.
XS 6000
Join the various components to each other.
Choose the cappuccino or ca e latte posi-
tion of the special steam nozzle.
The tube must not be twisted to ensure that the button is held in the correct position.
To prevent the milk drying on and in the auto-cappuccino accessory we strongly recommend that you
immediately:
- put clean water inside the jug and reinstall the di erent components
- run a "steam" cycle
- clean all parts with a moist cloth.
You can also use our special XS 4000 cleaner for milk systems.
To interrupt the hot water function, press any button. If the nozzle is blocked, clean it out with the needle
included. The maximum amount of hot water per cycle is limited to 10 oz/300 ml.
All manuals and user guides at all-guides.com

FROTHING MILK

Fill a frothing pitcher
Press the "steam" button
one-third and immerse
and follow the
the nozzle in the milk.
instructions on the screen.
You can remove the steam nozzle for thorough cleaning. Wash it using a brush
Run for at least 10
seconds, then again with water and a little non-abrasive dishwashing liquid. Rinse and dry. Before
press the button to re-assembly, make certain that the air inlet holes are not clogged by milk residue.
stop steam generation. If necessary clean out the holes with the needle included with the machine.
AUTO-CAPPUCCINO SET XS 6000 (SOLD SEPARATELY)
Fill in the milk recipient and
place a cup or a glass under
the auto-cappuccino nozzle.

PREPARING HOT WATER

While the screen displays the drink selection menu, press the "hot water" button
A message will ask you to place a cup under the steam nozzle. Again press the
"hot water" button to produce hot water.
Once your milk is frothed
to your liking...
Place your cup or glass under
Press the key to launch
the co ee outlet and launch
and then stop the cycle .
the co ee/espresso cycle.
10
press the "steam" button
to stop the cycle.Cycle
does not stop immediately.
XS 4000
Cleaner for
milk systems.
.