Menus And Control Panel - Newlux Air Power V120 Manual Del Usuario

MENUS AND CONTROL PANEL

The door of the appliance must be closed before the appliance can be
turned on.
When plugged in, the display is shown for 1 second, then the panel
disappears, leaving only the On/Off button visible, thus activating the
Standby mode.
C
o
MIN
Functions
ON/OFF: Press this button to turn on the appliance. The oven will
beep once. The Fry menu and the On/Off button will flash for 1 minute.
After 1 minute (approx.) of non-use, the oven will go into stand-by mode.
Press this button to start the cooking process, all menus (except the
selected one) and the Reheat button will disappear.
If during cooking you need to change the temperature or time, press
the [+] or [-] button, thus changing the settings you need.
TIMER: The timer is used to set the cooking time, it can be set from 1
to 90 minutes, except in the Dehydrate menu which is from 1 to 24 hours.
Use the [+] buttons to increase the temperature and [-] to decrease it.
In each menu you can adjust the time. Pressing the [+] and [-] buttons
will change the time by 1 minute up or down.
TEMPERATURE: Press this button to adjust the temperature from 80°C
to 210°C. Use the [+] buttons to increase the temperature and [-] to
decrease the temperature.
Each menu has a default temperature setting. The temperature
increases in 5°C increments when pressed briefly.
27 |