Menus And Control Panel - Newlux Air Power V55 Manual Del Usuario

MENUS AND CONTROL PANEL

It is necessary to place the baskets inside the device so that it can be
switched on.
When plugged in, the display is shown for 1 second, then the panel
disappears, leaving only the On/Off button visible, thus activating the
Standby mode.
Funciones
ON/OFF: Press this button to switch on the product. The fryer will
beep once. The menus will flash for 2 seconds, then remain fixed on the
panel.
By default, a time of 10 minutes and a temperature of 180°C will be
displayed.
After 2 minutes of non-use, the fryer will go into standby mode.
TIMER: The timer is used to set the cooking time, which can be
set between 1 and 60 minutes. Use the [T] buttons to increase the
temperature and [v] to decrease the temperature.
In each menu you can set the time. By pressing the [T] and [v] buttons
the time will vary by 1 minute up or down, flashing for 3 seconds.
TEMPERATURE: Press this button to adjust the temperature from 60°C
to 210°C. Use the [^] buttons to increase the temperature and [v] to
decrease the temperature.
Each menu has a default temperature setting. The temperature
increases in 10°C increments when pressed briefly, except in the
Preheat, Defrost, Steak, Chicken and Fish menus which increases in 5°C
increments. The temperature will flash for 3 seconds.
C
o
MIN
27 |