Menus And Control Panel - Newlux Air Power V20 Manual Del Usuario

MENUS AND CONTROL PANEL

It is necessary to place the basket inside the device so that it can be
switched on.
When plugged in, the display is shown for 1 second, then the panel
disappears, leaving only the ON/OFF button visible, thus activating the
Standby mode.
Funciones
ON/OFF: Press this button to switch on the product. The fryer will
beep once. The menus remain fixed on the panel.
After switching on, four horizontal stripes are displayed by default until
you select the cooking menu.
After 1 minute without using, the fryer goes into standby mode.
TIMER: The timer is used to set the cooking time, which can be
set between 1 and 60 minutes. Use the [+] button to increase the
temperature and [-] to decrease the temperature.
In each menu you can set the time. By pressing the [+] and [-] buttons
the time will vary by 1 minute up or down.
TEMPERATURE: Press this button to adjust the temperature from 45°C
to 230°C. Use the [+] buttons to increase the temperature and [-] to
decrease the temperature.
Each menu has a default temperature setting. The temperature
increases in 5°C increments when pressed briefly.
25 |