Vibration Information - Worx Professional Sonicrafter WU670 Traducción De Las Instrucciones Originales

Vibration Information

Vibration total values (triax vector sum) determined according to
•
EN 60745:
Vibration emission value a
•
Typical weighted vibration
Uncertainty K = 1.5m/s²
Warning: The vibration emission value during actual use of
the power tool can differ from the declared value depending on the
ways in which the tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials are cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp
and in good condition.
The tightness of the grip on the handles and any anti vibration
accessories are used.
And the tool is being used as intended by its design and these
instructions.
This tool may cause hand-arm vibration syndrome if its use is
not adequately managed.
Warning: To be accurate, an estimation of exposure level in
the actual conditions of use should also take account of all parts of
the operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Help to minimize your vibration exposure risk.
All manuals and user guides at all-guides.com
= 3.94m/s
2
h
6
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep
well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across
a number of days.
C or less.
o