General Cleaning Instructions; Cleaning The Filter; Flushing The Pump; Storage - Parkside PRP 400 A1 Traducción Del Manual De Instrucciones Original

GB IE

General cleaning instructions

• Clean the pump with clean water after
each use.
• Remove any fluff and fibrous particles
that may have become trapped on and
under the pump housing (3) with a wa-
ter jet.
• Clean the float switch (1) and the suc-
tion foot (4) of deposits with clear water.
Cleaning the filter
The pump has a removable filter in the suc-
tion foot that protects it from contamination.
Depending on the degree of contamination
of the water, it should be checked occasio-
nally and cleaned if necessary:
1. Unplug the mains plug.
2. Turn the filter cover ( 22 ) a ¼ turn clock-
wise.
3. Remove the filter cover ( 22 ).
4. Clean the filter ( 23 ) under running water.
5. Install the filter ( 23 ) and filter cover ( 22 )
in reverse order.
The pump must not be operated with
the filter ( 23 ).

Flushing the pump

After pumping heavily polluted water, the
pump must be flushed to prevent deposits in
the pump.
• Pump lukewarm water (max. 35 °C) un-
til the pumped water is clear.

Storage

• Clean the pump before storage.
• Store the appliance in a dry, frost-free
place, and where children cannot gain
access to it.
24
• When the pump is not to be used for
a longer period, it must be thoroughly
cleaned after its last use, and before it
is next used. Otherwise there may be
problems in starting the pump, caused
by deposits and residues.
Space-saving storage
1. Dismantle the flexible pipe (17) and the
upper aluminium pipe (19).
2 Clip the flexible pipe (17) and the upper
aluminium pipe (19) right and left into
the pipe holder (12).
Keep the sealing rings ( 13/14 ) in a
safe place.
All other measures, particularly
opening the pump must be carried
out by a qualified electrician. Al-
ways contact the Service Centre if
repairs are needed.
Waste Disposal and En-
vironmental Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Electric appliances should not be
disposed of in the domestic gar-
bage.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center
about this. Defective units returned to us
will be disposed of for free.