System Description; Lay Out - Cebora TIG Sound AC-DC 2643/T Synergic Manual De Instrucciones

CEBORA S.p.A.
2

SYSTEM DESCRIPTION.

2.1

Lay out.

The Cebora SOUND TIG ROBOT Welding System is a multi-process system for Tig welding, developed
for use in combination with a Welding Robot arm on automated welding systems.
It comprises a Power Source, with integrated Control Panel, a Cooling Unit, a Wire Feeder Unit and a
Robot Interface (see fig. 2).
Power Source – Wire feeder extension
2
Power Source – Robot Interface signal cable connection (art. 1200, l = 5m).
3
Power Source – Robot Interface CANopen cable (1.5 m long, included in the Robot Interface).
4
5 Robot Control cabinet.
6 Welding wire 15 Kg spool holder (art. 121) (option Marathon Pack).
7 Tig torch.
8 Wire Feeder Unit (WF4-R3, art. 1661).
10 Welding wire sheath (art. 1935.00, l = 1,6 m; art. 1935.01, for Marathon Pack).
21 Power Source (Tig AC-DC 2643/T, art. 351-60; Tig AC-DC 3340/T, art. 352-60;
Tig AC-DC 4560/T, art. 353-60).
22 Cooling Unit (GRV10 or GR52).
24 Control Panel (integrated in the Power Source).
25 Robot Interface (RAI 217, art. 217-01).
26 Custom multiwire wiring.
This Instruction Manual refers to the Power Source, equipped with Control Panel and Cooling Unit, and
has been prepared to educate the personnel assigned to install, operate and maintain the welding machine.
It must be stored carefully in a place familiar to users, and consulted whenever there are doubts. It must
be kept for the entire operative life-span of the machine, and used to order spare parts.
The Cebora SOUND TIG ROBOT system has three models of Power Source to choose from one or the
other, based on system needs, and two Cooling Units used in combination with the Power Sources:

Power Source TIG 2643/T art. 351-60.
 Cooling Unit GRV10 (for art. 351).

Power Sources TIG 3340/T art. 352-60; TIG 4560/T art. 353-60.

Cooling Unit GR52 (for arts. 352, 353).
3.300.772-B
fig. 2
(art. 1168.00, l = 5m; art. 1168.20, l = 10m).
25
GB
10-03-2016